Luminary Micro Forums

	alainm Fresh Boarder
2008/11/21 10:57

Using Timer as a simple clock divider

I have a LM3S6965 with a 7.3728MHz Crystal, running at 50MHz.

How can I use a Timer to connect one input to the Crystal ouput, divide by four and get an ouput pin with 1.8432MHz for external UART chip 16C554?

I read throughtou tha manual and I could not find input and output setup for that.

Thanks for any help,
Alain

	psilva Senior Boarder
2008/11/22 13:50

Re:Using Timer as a simple clock divider

I have the same problem.
I searched for a TIMER application notes for LM3S6965, and found no one.
Is it possible to conect internally a timer output to another timer imput?

Best regards

Paulo

	psilva Senior Boarder
2008/11/23 09:55

Re:Using Timer as a simple clock divider

To help anybody with the same doubt, the new product stelarysware has code for timers.

regards

Paulo

Boardwalk :: Forum List Luminary Micro Forums General Discussion

Luminary Micro Forums

Browse Products

Evaluate

Quick Start

Luminary Micro Forums

alainm

Using Timer as a simple clock divider

psilva

Re:Using Timer as a simple clock divider

psilva

Re:Using Timer as a simple clock divider