Re:CodeSourcery, DriverLib and first steps

Hi Marco,

I tried to answer your questions:

1)Yes you can do it with eclipse using OpenOCD or LMIFlash. For eclipse you can use the example given in the FreeRTOS page as strarting point. LMIFlash can be used with command line, just use the external tool functionality of eclipse to do that

2)Codesourcery is based on GCC. CS3 is used to uniform the syntax for different cpu architecture i.e Interrupts.

3)Normally adding the header in the include path and the library in the library path should be enough

4)No library is missing. What you miss is eclipse (can be downloaded separately) and the debug sprite (used to download the code and debug the board) but you can use OpenOCD. Of course you also miss the support.

I'm personally using the lite vesion with eclipse and OpenOCD.

Post edited by: ravaz, at: 2008/07/02 09:51