Re:CodeSourcery, DriverLib and first steps

Try to follow this procedure (hope can be helpful for other forum users having the same troubles):



Eclipse+CDT:

http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/ganymede/R/ eclipse-cpp-ganymede-win32.zip
Download the file and unzip it in a folder of your preference.
You must add the Zylin embedded CDT, just use the help->update in eclipse, add the following update site http://www.zylin.com/zylincdt and install it.



Cygwin:

http://www.cygwin.com/
Download the installer and run it using the defaults.
The make file provided with cygwin has a problem with windows path. You can use the cs-make provided with codesourcery lite or replace the cygwin one with http://www.cmake.org/files/cygwin/make.exe
Ensure you have "C:/cygwin/bin" in the path.



Codesourcery:

http://www.codesourcery.com/gnu_toolchains/arm/portal/subscription?@template=lite
Download and install using the defaults. Ensure you have "C:/Program Files/CodeSourcerySourcery G++ Lite/bin" in the windows path.



OpenOCD:

http://openfacts.berlios.de/index-en.phtml?title=Open_On-Chip_Debugger
I didn't find an updated vesion of OpenOCD working for cortex in binary form (the one in FreeRTOS is very old). For that reason I build one from sources and I also added a new command called cond_write_image, this command is used to downlaod the image to the flash if not already present (diff file included in the archive).

An archive file with a preconfigured eclipse workspace and the OpenOCD binary can be downloaded there:

http://www.mediafire.com/?mmnth9cw99n.


Let us know about your progress in order to update/correct this procedure.



Regards

Post edited by: ravaz, at: 2008/07/23 16:40