Re:Luminary Micro Stamp Board...

cb1 wrote:
Good suggestion - but fraught with peril for the "pioneer." (too often the "leader's" board is copied/reverse engineered - greatly eroding ROI.)

There's not much to it that isn't already published via the eval board schematics. I'm currently developing an industrial monitoring 'pod' and there are three options:

#1 Single PCB containing all circuitry,
#2 Master CPU PCB with sampling card,
#3 Sampling card/psu with plug in CPU 'stamp'.

Option #1 is too fixed, so I was looking at option #2 but option #3 would allow more future product flexibility as less functionality is fixed by the CPU sub-system.

So I may end up designing the CPU Stamp for my own internal use...