Evaluation Kits
Evaluation kits provide a low cost, effective means of evaluating Stellaris Family microcontrollers. Slightly less feature-rich than Stellaris Family Development kits, evaluation kits focus on a single set of tools and a single Stellaris family member. Look here for information on evaluation kits created by Luminary Micro
and by our third party partners.
Evaluation kits created by Luminary Micro are all extremely versatile, spanning the spectrum from evaluation to design to application-specific prototyping by functioning both as an evaluation platform and as a serial in-circuit debug interface for any Stellaris-based target board.
| Evaluation Kit | Use for these devices |
|---|---|
| LM3S8962 Ethernet+CAN Evaluation Kits | 8000 Series |
| LM3S6965 Ethernet Evaluation Kits | 6000 Series |
| LM3S3748 USB H/D Evaluation Kits | 3000 & 5000 Series |
| LM3S3768 USB OTG Evaluation Kits | 3000 & 5000 Series |
| LM3S2965 CAN Evaluation Kits | 2000 Series |
| LM3S1968 Evaluation Kits | 1000 Series |
| LM3S811 Evaluation Kits | 800 Series, 600 Series, 300 Series, 100 Series |
| Rowley CrossFire LM3S102 Evaluation Kit | 100 Series |
| IAR KickStart Kit for LM3S102 | 100 Series |
| Stellaris Family Development Kits | 800 Series, 600 Series, 300 Series, 100 Series |
Learn More
LM3S8962 Ethernet+CAN Evaluation Kits
Stellaris LM3S8962 Evaluation Kits provide a compact and versatile evaluation platform for Ethernet + CAN enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.
Learn More
LM3S6965 Ethernet Evaluation Kits
The Stellaris LM3S6965 Evaluation Kit provides a compact and versatile evaluation platform for Ethernet enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.
Learn More
LM3S3748 USB Host/Device Evaluation Kits
The LM3S3748 EVB has connectors for both embedded USB Host and USB Device operation, allowing a range of USB application options to be evaluated. In USB Device mode, a small switch selects between bus-powered and self-powered options. Four ADC signals are paired as two differential channels to implement a 1 MS/s oscilloscope application on the LCD display. The oscilloscope feature set includes USB Host and Device connectivity as well as SD card support. The EVB may be used either as an evaluation platform or as a low-cost in-circuit debug interface (ICDI).
Learn More
LM3S3768 USB On The Go Evaluation Kits
The Stellaris LM3S3768 USB controller provides full OTG negotiation and support for connection to non-OTG peripherals or host controllers. With a single USB microAB connector, the LM3S3768 EVB supports On-The-Go (OTG) as well as Host and Device USB capabilities. OTG cables, included in the kit, allow a wide range of USB applications to be evaluated. A small switch selects between bus-powered and self-powered options. Four ADC signals are paired as two differential channels to implement a 1 MS/s oscilloscope application on the LCD panel. The oscilloscope feature set includes USB Host and Device connectivity as well as microSD card support. The EVB may be used either as an evaluation platform or as a low-cost in-circuit debug interface (ICDI).
Learn More
LM3S2965 CAN Evaluation Kits
The Stellaris LM3S2965 CAN Evaluation Kit provides a compact and versatile evaluation platform for CAN enabled Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly. The Stellaris LM3S2965 CAN Evaluation Kit is a fully operational CAN Network-in-a-box, with a quickstart sample application that includes a CAN network and CAN traffic.
Learn More
LM3S1968 Evaluation Kits
Stellaris LM3S1968 Evaluation Kits provide a compact and versatile evaluation platform for LM3S1000 Series Stellaris ARM® Cortex™-M3-based microcontrollers. Each board has an In-Circuit Debug Interface (ICDI) that provides hardware debugging functionality not only for the on-board Stellaris devices, but also for any Stellaris microcontroller-based target board. The evaluation kits contain all cables, software, and documentation needed to develop and run applications for Stellaris microcontrollers easily and quickly.
Learn More
LM3S811 Evaluation Kits
Measuring just 3.5" by 1.5", the Stellaris LM3S811 Evaluation Kit is exceptional for its compactness and versatility, spanning the design spectrum from evaluation to prototyping to application-specific design by functioning as both an evaluation platform for the Stellaris LM3S811 microcontroller and a serial in-circuit debug interface for any Stellaris microcontroller-based target board.
Rowley CrossFire LM3S102 Evaluation Kit
All that you need to evaluate the stunning new Stellaris LM3S102 Cortex-M3 microcontroller from Luminary Micro! Rowley bundles the CrossFire LM3S102 evaluation board, a mini-USB cable, a Getting Started manual, and a license for CrossWorks for ARM (locked to the board).
IAR KickStart Kit for LM3S102
The IAR KickStart Kit for Luminary LM3S102 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications. The kit contains the LM3S102 development board with IAR J-Link on-chip; a 20-state version of visualSTATE, and an evaluation version of the IAR Embedded Workbench with an 8KB version of the ARM C/C++ compiler.
Boards and Development Kits
The Luminary Micro Stellaris Family Development Kit provides the hardware and software tools that engineers need to develop and prototype embedded applications right out of the box. If you have already purchased the Luminary Micro Stellaris Family Development Kit packaged with a specific daughterboard, you can work with our full line of microcontrollers by ordering additional daughterboards to use with the same kit.
| Kit | Use for these devices |
|---|---|
| Stellaris Family Development Kits | 800 Series, 600 Series, 300 Series, 100 Series |
| Additional Daughterboards | 800 Series, 600 Series, 300 Series, 100 Series |
Kits
Reference Design Kits accelerate product development by 
providing ready-to-run
hardware, and comprehensive documentation including hardware
design files.
Learn More
Evaluation Kits
provide a low cost and effective means of evaluating our microcontrollers before purchase.
Learn More
Development Kits provide you with all the tools you 
need to develop and prototype embedded applications right out of the box.
Learn More
